Talita all PM Drive

[vlad]

Submitted by Jono to the main page: This news or information is not for the "what I believe is true" attitudes please. This is not about conspiracy stories for the old "mean gooders" or mis-informed.

Anybody familiar with the pebble bed?

Anybody familiar with the DRS?

Any body familiar with the Talita permanent magnet drive?

a Brief explanation regarding the Talita drive on the only basic principles a permanent magnet drive can turn continiously. Please understand this is the first step to continious Pm rotation and also the only way to break ZPE or "sticky point" as some calls it. a PM drive can only work in a complete ring where one creates 700 degrees in a 360 degree circle, rotating 360 degrees continiously. This sounds impossible or insane?

One must understand the disadvantage physic's have, and we acknowledge the masters are only human, they do not understand what the term use means in productive energy because the word gain is confusing with that use. You use nothing for free and there for they see use in productive energy in the same way the barbarians 10 000 years before saw it, meaning dispose it, burn it up! Wear it out! Thats what you pay for in all reason. Permanent magnet fields are permanent, one can not dispose it but rather USE it and for this reason "you pay for what you use" gets tricky when aproached reasonable.

The information below regarding magnetic rotation based on the Talita drive invention is given and permitted by the inventor of Talita to share and will hopefully help reasonable truth seekers and inventors to understand the reality of the "flight from facts to feelings" based on physics for certain reasons.

For some, parts of this information will sound bizzare or make absolute no sence, relax, we know the greatest disadvantage of permanent magnetic fields is it's retartness when it comes to speed and time, we aknowledge some humans have the same disadvantage in understanding and the reason they searching for something they wish not to find.

There is no way nor method that one can get continious magnetic field rotation by using a rotor packed with magnets trying to rotate it by attract or repel it to stator magnets. For the simple reason any magnet, doesn't matter what shape or size, have a magnetic center. a Magnetic center (called ZPE or sticky point) is the strongest point of a magnet, there for what ever pulls towards it, always search for it, and when found it sticks. Also what ever repell from it, will not search for it, never pass it and repell away from it from any position, angle or point as far as possible. (lesson one)

(lesson two) There is no way one can get linear action from magnets rotating with a rotor, and to get magnets in continious motion one needs linear motion.

There for Magnetic rotation is the only way to achieve rotation with PM's. A simple example of magnetic rotation:
Put a flat permanent magnet in the palm of your hand, and one on the outer of your hand so the two magnets pull towards each other. Then roll the magnet in the palm of your hand around and see what the outer magnet do, roll it on it's side and hold it, see what the outer do.

As can see, there is a very big difference if one put that magnet inside a rotor, or create magnetic rotation. It doesn't matter what rotor one use, steel, wood or gold, doesn't matter which direction your magnets pull or repell, north south, east west, up or down, the result will be the same with a rotor.

In a normal 25 x 12 x 50 neo 52 magnet the distance of the magnetic center on a single pole will not exceed 1mm (please note this is one half or side of the ring), but if you enter before shaft and right on pole magnetic center on the same pole in linear, something very amazing happens on the time trim. Where it is suppose to repel, it goes in free on the same pole, not pulling but free, and because your magnetic centers mesh on 50%, 45 degree linear tip entry and create a multiple magnetic center distance between the face and pole centers. You now have 10mm distance magnetic center/s on airgap instead of one which increase your magnet's normal strength the same amount in that distance. The result is the rotating magnet will go in free because you have unbalanced magnetic centers meshed between pole and face. Once on the magnetic center distance it will accelarate in more power than the magnet's normal strength or face center strength and shoots out to over 120 degrees on the face to face, of the oppisite pole which free's it from secondary fields.

The reason your rotating magnet goes in free at that angle is because you enter on magnetic center (the strongest point) which at this angle is unbalanced and distanced between pole and face centers. Your rotating magnet MUST always enter the stator magnets on a 43 to 48 degree angle on the smallest point of the rotation magnet (meaning the corner tip). The reason is you have extend your stator magnetic centers to e g 10mm, and you want your rotation magnet TDC to be e g 1 mm to create a direct direction ride. (From the tip you have two 45 degree faces, one north, one south, meaning one pull and one repell. make sure the last and full face one repel).

Magnetic rotation is where you bring your rotating magnet linear in to usage airgap, then it rotates the magnet in a perfect 90 degree square turn with a very large distance of power on the stator magnet's magnetic center. The tip establish the airgap, and by the time the rotating magnet's magnetic center reach the stator magnets there is no more airgap except for a distined after magnetic center tip which is needed at that stage to repel away from the magnetic centers both sides. (This can be supported with steel)

The proof test is easy, if you bring the rotating magnet in from one direction as above, it will enter free and shoot out to the other side free from direct fields, but if you bring it in from the oppisite side it will simply lock or sieze before magnetic center.