|
There are currently, 215 guest(s) and 0 member(s) that are online.
You are Anonymous user. You can register for free by clicking here
| |
| |
Stationary Field Generators
Posted on Sunday, November 27, 2005 @ 22:26:28 UTC by vlad
|
|
DanielJackson writes: I have been out here awhile working in the field of radio electronics
awaiting the time when folk would get caught up, as well as educated
up; in science as well as politics: particularly in the area of
technology suppression.
As an inventor of a new energy
technology in 1985, I did not then find interest. Nor were there any
local folk involved in electronics skilled enough to follow even the
basic fundamentals. All I needed then were a few souls able to follow
the basics. I could have had them building a device, that studious high
school kids could actually build and test with a little reading.
So I wonder now if there are any souls ready to do some reading? Even
willing to get a few capacitors and diodes at Radio Shack, to try
things out?
As I look around at the explosion of interest in Tesla
coils, as well as all of the fine examples of home built coils I have
seen and downloaded the graphics of. I think perhaps now the climate is
right. It was a book that I read on Tesla's patents in 1984 that I
looked at from a seasoned radio tech's view that got me to seeing
things differently.
And well, since I had then my own little
electrical lab at home (and I still do) I did some after hours
investigating. For long hours then. And even for long hours in the
years to come. Yet, I did it way back then and when you finally see
it, you will wonder how anyone could have passed such a simple thing
by? Especially since we need such items as this in this world for its betterment.
This might sound funny but I sent my finalized text in PDF fomat to
the electrical engineers around the states, who work for TBN stations.
I thought since that I listened allot to our fine shortwave radio
stations around the USA, that I would send it to them first? I did send
it back a while ago to WBCQ.
I just realized that my browser
would not copy this to my Sun text software so I can not edit this.
Anyways if I misspell a word or so just over look it.
I was
doing this back then as I saw it, for the good of us all and the
creation. My experiences since then have perhaps shattered my allusions and
I know how the world is really run today and how it has been run since
way before Nikola Tesla. Yet, maybe it is the time now. I hope so. So,
God Bless us all for the adventure that lies ahead. I do not choose the
ham radio techs who failed to further their skills but rather I choose
the Tesla Technology community that exist today around the world. I
have something for you all that is truly wondrous in terms of
technology. Do not forget, it is already here. There are no state of
the art technology barriers in manufacturing this once you learn how
simple it really is.
Anyways, it is a priviledge to have such a means and a forum of communications. Look up! It will not be much longer now.
Dan
===================
* "In A Nut Shell"
Herein, I would say here that my view is a "relativistic" view and that
should be enough to spark curiosity. Relativity is merely the
observation of things from another vantage of view. Hence things are
thus "relative" to that vantage. Thus, from another vantage point we
may obtain a three dimensional view or a four dimensional view of the
workings of things and thus make a re-application of known text book
principles from that new vantage towards a newly realized objective
and, not violate any of the laws of physics. Our views are thus divided
between two vantages in physics, the classical physics view (Newtonian)
and the relativistic view or non classical views
(Einstein).
There is much talk of such things as zero point energy and over unity
devices. I really can't say much about that since my device does not
fall into those categories. I can say this, *I have found a way to use
the forces of electricity generated from a stored charge to do work by
way of field forces, that work at a distance: to move electrons
elsewhere into current flow to do work. And thus, I do not “physically”
use the stored energy charge itself, as we conventionally do now in all
our current electrical power generation schemes. (Please read this
paragraph again carefully if you are not certain of what was just
described. Comparing a stored charge to generated charges.)
This means that I do not use the energizing charge as a means of stored
electron current flow. I use the forces generated by that energizing
charge to move electrons elsewhere into current flow and thus I do not
deplete my stored charge as we would in the case of a battery or via a
stored capacitor charge that is discharged through an external load.
The Chief Technical Advantage here is that "we do not deplete our
energy charge" since we do not physically use it. Instead, we use the
electrical field forces that the electrons in our stored charge exert,
to move electrons elsewhere by means of the principles of like and
unlike electrical charges which can pull or attract if they are unlike,
or, push or repel if they are like in electrical polarity.
Hence upon close examination this is not something that violates the
law of the conservation of energy. It is merely a re-application of
known text book principles into an objective scheme of operation.
Basically it is very simple in nature to implement and use. And “it
should be simple” and not at all complicated.
I hence named the technology a "stationary field generator." I also
view this as a type of energy processor. Or a dry charge generator,
etc. A kind of electrostatic field force generator. Which is non
electromagnetic and non electromechanical. Hence: solid state and
direct current in nature.
So the principle is this in a nut shell, I have a stored charge that I
use as my energy source such as a charge we have in a battery and
exactly like that in reality, however I do not use those electrons in
that charge as my current source. Instead, I allow the electrical field
forces they perpetually generate to do the work of exerting those
fields upon "other electrons" to move them to a point of excess
accumulation and then, exit, at a terminal through an external load
such as a lamp or radio. Simple.
4
There are no AC currents involved, it is all DC in nature and all the
parts I need are electrolytic capacitors for the stored charge and
voltage divider applications and semiconductor diodes to direct my
generated up current to the external load. Hence as I said earlier I
can show you something perfect. Also, purely simple.
The previous descriptions define the principles behind and leading into the topic that is known as The Proof of the Principle.
Amazingly, this also works at high voltages with vacuum tube diodes as
well as diode like voltage regulation vacuum tubes. You can also
replace one diode with a triode with signal applied and create a 60 Hz
signal voltage scheme.
The energy balance is such that there is allot of energy stored in the
energizing charge of which we obtain our electrical field forces from,
to do work, and the generated charge is much less in comparison. The
energizing charge hence is the source of energy, yet, unlike other
generation schemes such as the battery where we use that stored charge
as our source of electron current, we do not do so in this scheme;
instead we use the field forces that the electrons in the charge are
forever generating. Again the Chief Technical Advantage of this
technology is: we do not deplete our energy source. There are in
reality some losses, and we shall learn to calculate them later herein.
(We store the charge in voltage divider capacitor networks which will
give us both a negative ground potential and a positive above ground
potential so that we have both types of charges to do work with. Our
objective then is to merely use the positive potential forces to
attract up a flow of electrons from ground potential to a place in the
scheme of excess electron accumulation and deposit, where we have
created a negative potential reservoir of charge for exit to a device
we wish to power.)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
The manipulated up charge is an electron charge taken from the ground
buss and not from the power supply that gave us the energizing charge.
We must keep the idea of the greater amount “energizing” electron
charge and the “manipulated up” charge separate in the view to analyze
them in contrast: in order to understand and be able to work with the
idea herein. Thus the stored charge and the manipulated up charge are
not one and the same in source but separate. The only link between them
is the “field forces” of the stored charge that attracts up the
manipulated up charge.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Daniel Jackson SFG Research Limited
|
| |
Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.
| |
Average Score: 4.5 Votes: 4
| |
|
No Comments Allowed for Anonymous, please register |
|
Re: Stationary Field Generators (Score: 1) by tomcat on Monday, November 28, 2005 @ 04:27:43 UTC (User Info | Send a Message) | I'd like to see some schematics on this. I have several Radio Shacks
and a Science surplus center near by. I'm not and electronics engineer
but, I've the resources and the will.
tomcat
|
|
|
Re: Stationary Field Generators (Score: 1) by ElectroDynaCat on Tuesday, November 29, 2005 @ 08:53:16 UTC (User Info | Send a Message) | Electrolytic Capacitors are actually power sources, small but steady,amounts of voltage come out of them, and if you shory the leads together, eventually those little batteries run down. Try hooking one up with the wrong polarity and they will explode, because the electrolyte will decompose into hydrogen and tin oxide, then the hydrogen will explode.
The answer to energy is not in tubes and wires, its in nanotechnology.
|
|
|
Re: Stationary Field Generators (Score: 1) by DanielJackson (overunityenergy@netzero.com) on Thursday, December 01, 2005 @ 02:53:37 UTC (User Info | Send a Message) | Hello Tomcat,
Send me your email address at overunity@netzero.com
I will then try to email you my 45 page Adobe PDF on
stationary field generators if the service provider I use will have their
network running right. Sometimes I upload and well you know it
doesn't get through but I will try and you can return email to let me
know if it came through, if not I may try to send you a floppy or CD Rom of the material.
Check my address on my user profile page
alternate email for me is sfgresearch@netzero.com
I would upload the pdf here somewheres for everyone to download
only on this site, and no other site: but I do not know where to do
that at zpenergy.
Do not be surprised if I only get around to this site once a month to check in.
I have been using a website builder lately to build a future site and
that has me busy here. So thats in the forcast somewhere.
|
|
|
Re: Stationary Field Generators (Score: 1) by DanielJackson (overunityenergy@netzero.com) on Thursday, December 01, 2005 @ 13:53:17 UTC (User Info | Send a Message) | Want It Now? Today?
Here is a bulletin board where you can
temporarily download the SFG PDF
since I have gotten allot of emails for it.
www.overunity.com
register to log in and go to the post called
"How About Theory Sections?" page 2
scroll down to post by Daniel Jackson
you'll see a little pdf icon SFG.pdf click it.
that page is
http://www.overunity.com/index.php/topic,399
this is a temporary download site till download is made available here
copy all of this info so you can get to where you are going!
|
|
|
Re: Stationary Field Generators (Score: 1) by DanielJackson (overunityenergy@netzero.com) on Thursday, December 01, 2005 @ 16:00:31 UTC (User Info | Send a Message) | For your further aid to you
I have moved the page up to getting to the SFG PDF
from the www.overunity.com home page
scroll down to
"News and other anouncements:"
to News
click on "News"
then click on
"Get Your Over Unity Energy Device Now!"
Daniel Jackson
this will help you all out.
|
|
|
SFG paper soon available for download (Score: 1) by Rob (rob@zpenergy.com) on Friday, December 02, 2005 @ 04:39:13 UTC (User Info | Send a Message) http://www.zpenergy.com | I've received the SFG paper from Daniel. So very soon you will find it in the Downloads/New-Energy section of papers.
On my first look at the paper, I must say its refreshing to read a paper with schematics, calculations etc. as opposed to a lot of "talk" as we are normally accustomed to. But, I have yet to understand it. |
|
|
|
|