 |
There are currently, 167 guest(s) and 0 member(s) that are online.
You are Anonymous user. You can register for free by clicking here
| |
| |
Perendev Magnetic Motor Tooling for Mass Production
Posted on Wednesday, June 30, 2004 @ 21:32:40 UTC by vlad
|
|
Sterling D. Allan writes: PESN > Perendev is Tooling Up for Magnetic Motor Mass Production in Europe - All-magnet motor poised to be first to reach market. German manufacturer licensed to manufacture 20 kw unit for Europe and Russia. Video posted publicly for first time. (Pure Energy Systems News Exclusive; June 30, 2004)
...Refusing to be daunted by what he considers to be petty dogmas of academic science, inventor Michael J. Brady of Johannesburg not only claims to have produced such a device, but reports that his company, Perendev Power Developments Pty (Ltd) is now in process of manufacturing it on a large scale for markets in Europe, Russia, and Australia...
...
Twenty kilowatts is adequate to handle the peak load of most homes. Ran continuously at that rate, the excess produced during average use, which is five percent of peak use, could be sold to the grid for a quick return on investment. It will put out quite a bit more than twenty kilowatts, said Brady. "That is what it is rated to produce continuously."
...
Read article at: Perendev
|
| |
|
Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.
| |
Average Score: 4.66
Votes: 6
| |
|
|
No Comments Allowed for Anonymous, please register |
|
Re: Perendev Magnetic Motor Tooling for Mass Production (Score: 0)
by Anonymous on Thursday, July 01, 2004 @ 00:27:35 UTC | | All I can say is if this is indeed legit, than it is a tremendous step a gridfree tommorow! |
|
|
Re: Perendev Magnetic Motor Tooling for Mass Production (Score: 1)
by vlad on Thursday, July 01, 2004 @ 23:05:13 UTC
(User Info | Send a Message) http://www.zpenergy.com | Your old watchdog pickle (from free_energy yahoo group):
Message:
Date: Wed, 30 Jun 2004 23:39:19 -0000
From: "chipotle_pickle"
Subject: Perendev Magnetic Motor not Tooling for Mass Production
Mike Brady is not a good source to take at face value.
>From the article:
> A German company has licensed the manufacturing
> and marketing rights for all of Europe and Russia,
> excluding the U.K., and is in process of tooling
> up to begin mass production.
Great. So you called up the Germans and talked to them about their
plans, right?
> The name of the German company will be revealed
> when they have finished tooling up and are ready
> to begin production, which Brady estimates will
> take place in a month or two.
No it wont because there is no German company tooling up to produce
this device. Claiming to have production lines starting, licensees,
customers, or whatever in some far away country is a standard stall
tactic.
> The site features video footage of an earlier
> prototype running as well as computer simulations
> of the newer designs. The prototype video is
> not skeptic proof, as it does not do a walk-around
> during acceleration. Brady has been promising
> another video that would do a walk around before,
> during, and after motor engagement and acceleration
> followed by disengagement and deceleration.
Forget the video. Show us the checks from the electric company for all
the power he's been selling them.
|
|
|
KeelyNet warning (Score: 1)
by vlad on Saturday, July 03, 2004 @ 23:03:41 UTC
(User Info | Send a Message) http://www.zpenergy.com | On the KeelyNet list Jerry Decker wrote:
Hola Folks!
Hector sent this URL which verifies what has been written several times on this discussion list to warn people about both Perendev and Allan, but people don't listen and believe this garbage only to get burned and complain about it later, I won't quote the article, go there and read it as a warning;
http://www.phact.org/e/z/perendev.htm
|
|
|
Re: Perendev Magnetic Motor Tooling for Mass Production (Score: 0)
by Anonymous on Tuesday, July 06, 2004 @ 05:35:00 UTC | These devices are forever "poised" to come to market. They're always in the final stages of development, gearing up for mass production, just around the corner. Inevitably, they never appear as promised. There's always some excuse, such as, "Oops! It doesn't actual work." (Lutec, Bearden), or , "Oops! I never actual actual built one to test the idea." (Garry Stanley), or, "Oops! We know about several devices, but can't get our hands on them." (SEAS), or "Oops! It's all just a hoax." (Jasker), or "Oops! It's all just a con game. Want to invest?" (Tilley, Lee, Genesis, many others).
Frankly, a person or company saying they're PLANNING to bring a FE device to market is not news. I propose a ban on the future tense in zero point reporting. If a device actually apears on the market, then we've got something to talk about. |
|
|
|
|
